Opel Repair Manuals | Opel Kadett removal and installation clutch pedal
Performance order:
1. In a motor compartment measure length of a carving tip of a cable of the clutch, acting of the squeezing lever. This size is necessary for using for maintenance of correct installation of a cable of clutch.
2. Remove a buckle which attaches a carving tip of a cable of clutch to the squeezing lever, and remove from the lever a carving tip. For simplification of removal move the lever to the engine.
3. In a passenger compartment remove the bottom panel of furnish in deepening for feet of the driver.
4. On the right side of a clutch pedal shaft remove fixing buckle, then unscrew a nut of fastening of a pedal and remove a hollow disk.
5. Take a shaft of a clutch pedal from a bracket, then lower downwards a pedal and a returnable spring.
6. Note an arrangement of hollow disks and layer pads on a shaft of a clutch pedal for their repeated installation on the places.
7. Unhook a cable of clutch from a clutch pedal, release a returnable spring and take a clutch pedal and a returnable spring from the car.
8. Installation is made in sequence, return to removal.
9. Before installation grease a shaft of a clutch pedal with lubricant on the basis of molybdenum di-sulphide.
10. If necessary adjust a clutch cable.
